How to Install the AEON-50201 Recessed In-Wall TV Mount | Step-by-Step Guide

Meta Description: Learn how to install the AEON-50201 (NSY-50201) recessed TV mount. Designed for standard US 16-inch wood studs, achieve a true zero-clearance flush fit with this full-motion bracket.

Ultimate Guide: How to Install the AEON-50201 Recessed In-Wall TV Mount

Tired of bulky brackets and messy cables ruining your living room’s aesthetic? The AEON-50201 Recessed In-Wall TV Mount (also recognized as the NSY-50201) is the ultimate solution for a modern, minimalist home theater. By hiding the articulating arm completely inside the wall cavity, your TV sits perfectly flush against the drywall, creating a stunning “floating painting” effect.

This heavy-duty mount securely holds 42″ to 75″ flat or curved screens up to 80 lbs (tested to hold up to 125 lbs maximum capacity) and extends a massive 19 inches for optimal full-motion viewing.

Below is your step-by-step installation guide, specifically optimized for standard American home construction.

⚠️ Crucial US-Geo Compatibility & Safety Notes

  • 16″ Studs Only: This mount is precision-engineered to fit perfectly between standard US 16-inch on-center wood studs. It WILL NOT WORK on 24-inch spaced walls.
  • No Metal Studs: Under no circumstances should this product be mounted to metal studs.
  • Two-Person Job: Always have a second person assist you when lifting and hanging the television.

🛠️ Tools Required for Installation

Before you cut into the drywall, ensure you have the following tools ready:

  • Phillips Screwdriver
  • Ratcheting Wrench
  • Power Drill with a 3/16″ Drill Bit
  • Drywall Saw / Cutting Tool
  • Level & Stud Finder

——————————————————————————–

Step-by-Step Installation Instructions

Step 1: Locate Studs and Mark the Cutout Area

Determine the ideal height for your TV. Use a stud finder to locate two 16-inch on-center wood studs.

  • Mark an area on the wall that is exactly 14.5 inches wide by 13 inches tall.
  • Ensure the vertical edge lines of your marked box sit flush against the inside edges of your two wood studs. The center of this cutout will be the center of your television.

Step 2: Cut the Drywall

Using the appropriate drywall cutting tools, carefully cut out the marked 14.5″ x 13″ rectangle to expose the wall cavity.

Step 3: Pre-Drill and Mount the Recessed Box

  1. Insert the metal in-wall box into the opening. Push the box securely against the right stud and mark the location of the four mounting holes (G1, G2, G3, G4) on the studs.
  2. Remove the box and pre-drill the four marked locations using your 3/16-inch drill bit.
  3. Re-insert the metal box into the wall (ensuring the articulating arm is attached on the left side).
  4. Using your ratcheting wrench and the provided lag bolts, securely tighten the box directly into the wood studs. Do not use an impact drill, as it may cause damage.

Step 4: Attach the VESA Plate to Your TV

The AEON-50201 is universally VESA compliant from 100x100mm up to 400x400mm.

  • Check your TV’s VESA pattern. If your pattern is larger than 200x200mm (e.g., 300×200 or 400×400), you must first attach the two included extension wings to the main TV wall plate using the provided bolts, washers, and locknuts.
  • Align the TV plate to the back of your TV, ensuring the word “TOP” is facing up.
  • Screw the selected bolts through the washers and plate into the back of your TV. If your TV has a curved back or recessed mounting holes, use the included plastic spacers.

Step 5: Hang the TV

  1. Attach two nuts to the top two permanent bolts on the back of the TV plate, leaving about a 1/4-inch space between the nut and the plate.
  2. With a partner, lift the TV and slide the top two bolts into the U-shaped slots on the top of the mount’s arm extension.
  3. Secure the remaining two locknuts to the bottom bolts, then tighten all four locknuts securely using the provided spanner.

Step 6: Level Adjustments

Once the TV is mounted and the arm is extended, check if the screen is level. If it requires adjustment:

  • Loosen the two bolts with oval slots located at the back of the arm assembly.
  • Adjust the horizontal level of the TV (allows up to ±6° of adjustment).
  • Retighten the bolts to lock your perfectly leveled TV in place.

Step 7: Professional Cable Management

To achieve a true wire-free aesthetic, the AEON-50201 recessed box comes with four standard single-gang knockouts (two on top, two on the bottom).

  • Punch out the appropriate holes to run high-voltage power to an electrical box and low-voltage A/V cables (like HDMI) into the cavity.
  • Route all cables through the integrated wire tracks along the articulating arm. Push the TV in and out to ensure the arm moves freely without pinching or damaging your cables.

Need visual inspiration for your new flush-mount setup? The AEON-50201’s 19-inch extension and 180° swivel capabilities make it perfect for multiple viewing angles in luxury master bedrooms, living rooms, and professional commercial spaces. Tuck it away when not in use, and enjoy the ultimate zero-clutter aesthetic!